|
Home <
Agitators
- Stirrers <AG.66 |
LABORATORY STIRRERS
With step less mechanical regulation TYPE AG. 66 |
LABORATORY STIRRER
AG.66 with SLOW SHAFT and FAST SHAFT |
Utilization stirrer
AG 66 slow
shaft |
Utilization stirrer
AG 66 fast
shaft |
This device is composed basically of a motor and a continuous mechanical speed variator which, placed in the same housing of die-cast
aluminium alloy, form a single and compact block. By means of a pressure screw and two shock absorbers, this layout allows perfect
self-balancing of the mating of the motor and the variator, thus ensuring high performance and
long life of the stirrer. |
MAIN CHARACTERISTICS |
- MOTOR
- single phase with condenser
- input power 70 Watt
- output power 30 Watt
- shaft mounted on ball bearings
- efficient self ventilation
- silent operation
- overheating protection 130° C
- simple and robust construction
- requires no particular maintenance
- CONTINUOUS MECHANICAL SPEED VARIATOR
- built according to the cone and roll
clutch principle
- this system allows one to obtain;
on primary shaft: from 280 to 2200 r.p.m.
on secondary shaft: from 35 to 250 r.p.m.
- speed regulation with a knurled knob, indexed scale with
speed control indicator
- exit shafts with through hole, allow easy height
regulation of the stirring rods
- HOLE for support rod: allows the
stirrer to be placed in the desired position
- SWITCH bipolar and light
- OUTPUT CABLE 2 m. long and earthed
plug; supply voltage 115 V 60 Hz, or 220 V 50 Hz
- CHUCK self centering and chrome plated,
with 3 jaws, complete with key; grip capacity: 0 - 8 mm
- WEIGHT Kg. 3,200 including support rod
and chuck
|
USES
|
- FAST SHAFT suitable for a capacity of
up to 15 litres of aqueous or weak viscosity solutions
- SLOW SHAFT suitable for medium
viscosity solutions
ACCESSORIES (on request)
- Stand
- Special clamp
- Agitation bar
|
Cat.
No |
|
AG.66 |
AG.66U |
motor
input/output |
W |
70/30 |
70/30 |
number of shaft |
|
2 |
1 |
speed
ranges |
rpm |
35-250/280-2200 |
280-2200 |
speed
indicator |
|
scale-marks |
scale-marks |
torque
max (see diagram) |
N
cm |
120 |
24 |
viscosity
max |
Pa
s |
50 |
10 |
stirring
capacity |
l |
25 |
25 |
chuck
capacity |
mm |
0
- 8 |
0
- 8 |
dimension |
mm |
250x120x180 |
250x120x180 |
weight |
kg |
3,2 |
3,1 |
motor
protection |
|
overheat
protection automatic reset |
overheat
protection automatic reset |
condition
of use: ambient temperature |
°C |
0
- 40 |
0
- 40 |
condizioni
d'uso: humidity max |
% |
80 |
80 |
protection
class |
|
IP
20 |
IP
20 |
power |
|
220
V 50 Hz
115 V 60 Hz |
220
V 50 Hz
115 V 60 Hz |
|
|
|
|
|